Abrasion resistant Sand suction pump interchangable with G type
Sand gravel pumps are designed for continuously handling the most
difficult higher abrasive slurries which contain too big solids to
be pumped by a common pump. They are suitable for delivering
slurries in mining, explosive sludge in metal smelting, dredging in
dredger and course of rivers, and other fields. Type WS(G) pumps
are of high-head ones.
Tailings, sugar beet, dredging, slag granulation, cyclone feed,
slag granulation, suction hopper dredging, barge loading, mill
discharge, sand reclamation, booster pumping, sand waste, material
Construction of this pump is of single casing connected by means of
clamp bans and wide wet-passage. The wet-parts are made of Ni-hard
and high chromium abrasion–resistance alloys. The discharged
direction of pump can be oriented in any direction of 360°.
This type of pump possesses the advantages of easy installing and
operation, good performance of NPSH and abrasion-resistance.
Typies of driver: V belt driver, gearbox driver, elastic coupling
driver, fluid couplings driver, frequency conversion driver,
silicon controlled rectifier speed regulation etc.
All the pumps and pump parts are interchangable with G series sand
gravel pumps. Such as
6/4D-G, 8/6E-G, 10/8F-G , 12/10G-G, 14/12G-G